Battery Operated Field Electric Vacuum Pump PAV 2000 : For soil sampling
930,00 €
- RAPID VACUUM CREATION: Achieves a vacuum of -750 mbar in less than 15 seconds, significantly speeding up soil sampling.
- HIGH AUTONOMY & PORTABILITY: Offers 5 hours of continuous operation with a lightweight and durable aluminum design for convenience in the field.
- INTEGRATED SMART CHARGING SYSTEM: Includes a maintenance-free 12V, 5A/hour battery with a smart charger for easy recharging.
- PRECISION & PROTECTION: Equipped with an accurate Bourdon-type manometer and a Gore-Tex filter to guard against water ingress.
- COMPACT & EASY TO USE: Compact dimensions (200mm x 130mm x 240mm) with a simple three-position operational switch.
[wpdatatable id=93]
– Principle –
With a completely new design, this electric vacuum pump for field use offers unparalleled comfort in soil solution sampling experiments using the porous ceramic method or others.
Lightweight and with remarkable electrical autonomy, the PAV 2000 vacuum pump assists field technicians in creating a vacuum in the sampling rods. Thanks to a particularly efficient flap pump, a vacuum equivalent to -750 mbar() is achieved in less than 15 seconds in a medium-length rod (75cm). As a result, and compared to manual pumps, field sampling sequences are executed much more quickly, eliminating the fatigue associated with manual pumping and thus greatly increasing efficiency. ()-250 mbar on P.A.
– Key Advantages –
Lightweight
Great electrical autonomy
– About SDEC –
SDEC is your global partner for SDEC solutions in radiation protection. Welcome to the world of SDEC France, a leader in environmental and scientific solutions for radiation protection in over 21 countries. Since 1991, SDEC France has been designing, manufacturing, and marketing a wide range of equipment for environmental study and monitoring.
– FAQ –
Additional information
| Flap-type vacuum pump | Vacuum at 250 mbar, equivalent to -750 mbar, adjusted by convention to an atmospheric pressure defined as zero mbar. |
|---|---|
| Integrated battery | 12 Volts – 5A/hour, sealed lead type-(maintenance-free-Sealed-). |
| Integrated battery charger | An intelligent type battery charger is integrated into the main housing. The battery is recharged by simply connecting the power cord (220V/50Hz). |
| Charging time | About 7 hours. |
| Charge indicator | By three-color L.E.D diode (red/orange/green: charge levels). Charging can be done at any time without any damage to the battery. The charger will only deliver the missing charge to the battery without any risk of overheating the unit. |
| Number of cycles (charge/discharge) | About 400, before battery replacement. |
| Vacuum indicator gauge | Bourdon type with mechanical brake. (0; -1bar). Accuracy: 1.60%. |
| Filter | The pump has a Gore-Tex type filter to protect the pump from accidental water entry (note, this filter is only effective for short water exposures and must be dried before reusing the pump. It is not effective for prolonged pumping). |
| Pump weight | 5 kg. |
| Housing | Housing |
| Front panel | Removable type for quick access to the GORETEX filter. |
| Dimensions | L : 200mm / largeur : 130mm / Hauteur : 240mm |
| 3-Position Type Switch | Battery charging / Rest / Pump operation. |
| Electrical Autonomy | Approximately 5 hours of continuous operation, which, in field conditions, equates to creating a vacuum in 350 SPS 200 type sampling rods with a diameter of 63 mm and a length of 50 cm. In field operation, the pump easily meets the needs of a large 12-hour day of experimentation. This autonomy is doubled if the extraction rods are 31 mm in diameter. |
